Johnston Equipment

Our Quality Assurance Process

Your pre-owned Certified Quality Reconditioned lift truck is warranted against defects in material and workmanship for a period of four months after installation or 350 hours, whichever occurs first on major components. Minor components are guaranteed for one month or 90 hours:

Click here to view more reconditioned warranty information.

Every pre-owned Raymond truck is put through our extensive quality assurance process:

• GENERAL: All units externally cleaned and checked for structural integrity and repaired as necessary. Certified load tested and equipped to all provincial government standards.
• DRIVE UNITS: Inspected for proper operation and leaks. Repaired as necessary.
• CASTER ASSEMBLY: Inspected for proper operation and damage. Repaired/adjusted as necessary.
• MOTORS: Tested for proper grounds and brush wear. Repaired as necessary.
• HYDRAULIC PUMPS: Inspected for leaks. Rebuilt or replaced as necessary.
• VALVES: Inspected for leaks and operation. Resealed as necessary.
• HOSE ASSEMBLIES: Inspected for leaks and damage and replaced as necessary. Some external cracks/checks are acceptable.
• ELECTRICAL PANELS: Visually inspected for corrosion, wear, Repaired as necessary.
• ALL ELECTRICAL CONNECTIONS: Checked to insure a good, tight connection.
• WIRE HARNESSES: Checked for wear and damage and repaired as necessary.
• CONTROLLER: Tested for proper operation. Repaired as necessary.
• MAST ASSEMBLIES: Inspected for physical damage and wear. Mast is repaired and reshimmed as necessary. Lift rams are inspected for chrome damage and leaks. Cylinders are repaired and repacked as necessary.
• BRAKE SYSTEM Tested for safe operation. Components are rebuilt or replaced as necessary.
• STEERING: Checked to assure smooth operation and no loose parts.
• WHEELS AND TIRES: Inspected for wear and serviceability and replaced where necessary. Some wear and small abrasions are acceptable.
• ALL MOVING PARTS: Lubricated as appropriate.
• PAINT: Unit is externally detailed or painted as necessary.
• INSPECTION/TESTING: The truck is operationally tested under various load conditions to assure proper operation of all controls and functions.
• UPDATES: All safety hardware and software updates are installed.
• ALL TRUCKS: Reset to factory default operating parameters before shipping.